 | 544D10-55
Telehandler |
The
Gradall model 544D10-55 telehandler combines a 10,000-pound capacity and 55-foot
lift height to reach the top of its class. A new protective cab design and standard
equipment stabilizers enhance the productivity and performance of this big machine.
Download
Gradall 544D10-55 Telehandler Product Brochure.
Gradall 544D10-55 Features:
90°
rear-pivot steering
10,000
lb (4,082 kg) capacity
Up
to 55 ft (13.7 m) lift height
Ultra-strong
boom allows for a full range of attachments
Single
joystick control for boom lift and crowd
No-shift
hydrostatic drivetrain
Gradall 544D10-55 Technical Specs:
Rated
Capacity @ 24 in. (610 mm) Load Center = 10,000 lb (4,536 kg)
Maximum
Lift Height = 55 ft (16.76 m)
Capacity
@ Maximum Lift Height = *5,000 lb (2,268 kg)
Maximum
Reach = 42 ft (12.8 m)
Capacity
@ Maximum Reach = *3,000 lb (1,361 kg)
Approximate
Operating Weight = 33,570 lb (15,227 kg)
Length
(Less Forks) = 237 in. (6.01 m)
Width
= 98.8 in. (2.50 m)
Height
= 98 in. (2.49 m)
Wheelbase
= 135 in. (3.42 m)
Outside
Turning Radius = 175 in. (4.44 m)
Ground
Clearance = 20.8 in. (528 mm)
Drive
= 4 x 4
Engine
= John Deere 4045HF275
HP
and RPM = 125 hp @ 2,500 rpm
Transmission
= Hydrostatic
Axle
- Front = High-Bias, Limited Slip
Axle
- Rear = Planetary Hubs
Steering
= 90° Rear-Pivot
Tires
= 14:00 x 24 - 12PR, G2 type
Maximum
Travel Speed = 19 mph (30.6 kmph)
Frame
Tilt Left/Right Frame Leveling = ±8 Degrees
What Can You Do with
a Gradall 544D10-55 Telehandler? Gradall telehandlers are widely recognized
for their strength, reliability and low cost of ownership. But it's their exclusive
90° rear-pivot steering that sets them apart. And gives you outstanding maneuverability
even in the tightest work areas. Operators can take them where other telehandlers
can't go. They can turn sharp corners, move down narrow aisles and square-up lumber
and block in crowded landing areas with greater speed and accuracy. All with a
clear view of the job site from the comfort of a spacious machine cab. Plus, Gradall
telehandlers can be equipped with a full range of attachments to handle a
wide variety of jobs. For the high level performance you need, there's almost
nothing a Gradall Telehandler can't do.
